High-performance, 2-part epoxy anchoring adhesive
Solvent-free, thixotropic, two part, epoxy resin-based, high performance anchoring adhesive.
Advantages
- Long Open Time
- Can be used in damp concrete
- High load capacity
- ETA to ETAG 001 for anchoring in concrete
- Non-sag, even overhead
- Styrene-free
- Shrinkage-free hardening
- Standard guns can be used (with the 250ml cartridge)
- Low odour
- Low wastage
Where to use
For the fixing of non-expanding anchors in the following: Structural work:
- Rebar / steel reinforcement anchoring in new and refurbishment works
- Threaded rods
- Bolts and special fastening / fixing systems
- Mechanical and electrical services installation (heating and ventilating, sanitary, etc)
- Anchoring of supports for ducting and equipment
Metalwork, carpentry:
- Fixing of handrails, balustrades and supports
- Fixing of railings
- Fixing of window and door frames
In the following substrates:
- Concrete
- Hollow and solid masonry
- Steel
- Wood
- Hard natural and reconstituted stone*
- Solid rock*
* These substrates may vary greatly, in particular with regard to strength, composition and porosity. Therefore, for each application the suitability of Sika AnchorFix®-3+ Adhesive must be tested by first applying the Product only to a sample area. Check in particular bond strength, surface staining and discoloration.
Product Data Sheet
Safety Data Sheet
Details
- Item: Sika Anchorfix 3 Plus
- Brand: SIka
- Colour:
- Component A: Clear / translucent
- Component B: Grey
- Component A+B mixed: Light grey
- Size: 250ml Ctg
- Quantity: 2 x Nozzles per ctg (12 ctg per box)
